Find suppliers for this alloy
C12510
| Elements | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | Fe | P | Ni | Bi | Sb | Te(2) | |
|
(1) Cu value includes Ag. (2) 0.025 Te + Se. |
||||||||||
| Min (%) | 99.9 | |||||||||
| Max (%) | 0.020 | 0.05 | 0.080 | 0.05 | 0.03 | 0.050 | 0.005 | 0.003 | 0.025 | |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
Section Size (in) |
|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | ||||||
| Flat Products | 1/2 Hard | H02 |
45 Typ |
39 Typ |
2.5 Typ |
0.003 |
| 1/2 Hard | H02 |
45 Typ |
39 Typ |
12 Typ |
0.02 | |
| 1/4 Hard | H01 |
40 Typ |
28 Typ |
5 Typ |
0.003 | |
| 1/4 Hard | H01 |
40 Typ |
28 Typ |
23 Typ |
0.02 | |
| 3/4 Hard | H03 |
48 Typ |
45 Typ |
2 Typ |
0.003 | |
| 3/4 Hard | H03 |
48 Typ |
45 Typ |
6 Typ |
0.02 | |
| Extra Hard | H06 |
55 Typ |
53 Typ |
2 Typ |
0.02 | |
| Extra Hard | H06 |
55 Typ |
53 Typ |
1 Typ |
0.003 | |
| Extra Spring | H10 |
59 Typ |
58 Typ |
1 Typ |
0.02 | |
| Extra Spring | H10 |
59 Typ |
0.5 Typ |
0.003 | ||
| Hard | H04 |
51 Typ |
49 Typ |
1.5 Typ |
0.003 | |
| Hard | H04 |
51 Typ |
49 Typ |
3 Typ |
0.02 | |
| Nominal Grain Size 0.015 mm | OS015 |
33 Typ |
12 Typ |
40 Typ |
0.02 | |
| Nominal Grain Size 0.015 mm | OS015 |
33 Typ |
12 Typ |
15 Typ |
0.003 | |
| Spring | H08 |
59 Typ |
58 Typ |
0.5 Typ |
0.003 | |
| Spring | H08 |
59 Typ |
58 Typ |
1 Typ |
0.02 | |
| Melting Point - Liquidus°F | 1981 |
|---|---|
| Melting Point - Solidus°F | 1949 |
| Densitylb/cu in. at 68°F | 0.323 |
| Specific Gravity | 8.94 |
| Electrical Conductivity% IACS at 68°F | 92 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 202 |
| Coefficient of Thermal Expansion 68-21210 to -6 power per °F (68 – 212°F) | 9.3 |
| Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) | 9.6 |
| Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9.8 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.092 |
| Modulus of Elasticity in Tensionksi | 17400 |
| Modulus of Rigidityksi | 6400 |
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Good |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Fair |
| Coated Metal Arc Welding | Not Recommended |
| Spot Weld | Not Recommended |
| Seam Weld | Not Recommended |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Excellent |
| Capacity for Being Hot Formed | Excellent |
| Forgeability Rating | 65 |
| Machinability Rating | 20 |
Common Fabrication Processes
- Bending
- Blanking
- Coining
- Coppersmithing
- Forming
- Stamping
Thermal Properties
No thermal properties for this alloy
| Product Category | Product | Reason Category | Reason |
|---|---|---|---|
| Architecture | Building Fronts | Appearance | Color |
| Building | Downspouts | Appearance | Appearance |
| Downspouts | Corrosion Resistance | Corrosion Resistance | |
| Downspouts | Solderability | Solderability | |
| Flashing | Appearance | Appearance | |
| Flashing | Brazing Characteristics | Capability for Brazing Seams | |
| Flashing | Corrosion Resistance | Corrosoin Resistance | |
| Flashing | Mechanical Properties | Ductility | |
| Flashing | Solderability | Capability for Soldering Seams | |
| Flashing | Welding Characteristics | Capability for Welding Seams | |
| Gutters | Forming Characteristics | Formability | |
| Gutters | Mechanical Properties | Strength | |
| Roofing | Appearance | Appearance | |
| Roofing | Brazing Characteristics | Capability for Brazing Seams | |
| Roofing | Corrosion Resistance | Corrosion Resistance | |
| Roofing | Mechanical Properties | Ductility | |
| Roofing | Solderability | Capability for Soldering Seams | |
| Roofing | Welding Characteristics | Capability for Welding Seams |
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.