Find suppliers for this alloy
C27460
Elements | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu(1) | Pb | Sn | Zn | Fe | P | Ni | Al | Si | |
(1) Cu + Sum of Named Elements 99.5% min. |
|||||||||
Min (%) | 60.0 | 0.15 | 0.15 | 0.20 | 0.080 | 0.060 | |||
Max (%) | 62.0 | 0.25 | 0.35 | Rem | 0.10 | 0.25 | 0.35 | 0.16 | 0.090 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
Rockwell B scale |
---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). | ||||||
Rod & Bar | 1/2 Hard | H02 |
67 Typ |
47 Typ |
25 Typ |
68 Typ |
Melting Point - Liquidus°F | 1680 |
---|---|
Melting Point - Solidus°F | 1650 |
Densitylb/cu in. at 68°F | 0.31 |
Specific Gravity | 8.44 |
Electrical Conductivity% IACS at 68°F | 20 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 65 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11.4 |
Modulus of Elasticity in Tensionksi | 15000 |
Modulus of Rigidityksi | 5500 |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxyacetylene Welding | Good |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Good |
Seam Weld | Not Recommended |
Butt Weld | Good |
Capacity for Being Cold Worked | Excellent |
Capacity for Being Hot Formed | Excellent |
Forgeability Rating | 95 |
Machinability Rating | 70 |
Common Fabrication Processes
Thermal Properties
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Plumbing | Fixtures | ||
Low Lead Valves and Fittings | |||
Plumbers Fittings |
Applicable Specifications
Corrosion Properties