Find suppliers for this alloy C40820
Chemical Composition
Elements
Cu(1) Pb Sn Zn P Ni
(1) Cu + Sum of Named Elements 99.5% min.
Min (%) 94.0 1.0 0.20 0.10
Max (%) 0.02 2.5 2.5 0.05 0.50
Mechanical Properties *
Form Temper Temper Code Tensile Strength
(ksi)
YS-0.2% Offset
(ksi)
Elongation
(%)
Vickers Hardness, 500 gm Fatigue Strength**
(ksi)
Proportional Limit
(ksi)
Section Size
(in)
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Flat Products 1/2 Hard H02 70 Typ
63 Typ
16 Typ
153 Typ
64 Typ
Extra Hard H06 93 Typ
90 Typ
7 Typ
198 Typ
75 Typ
Hard H04 85 Typ
80 Typ
13 Typ
181 Typ
38 Typ 74 Typ 0.009
Physical Properties
Melting Point - Liquidus°F 1971
Melting Point - Solidus°F 1947
Densitylb/cu in. at 68°F 0.322
Specific Gravity 8.9
Electrical Conductivity% IACS at 68°F 34
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F 82.1
Specific Heat CapacityBtu/ lb /°F at 68°F 0.092
Modulus of Elasticity in Tensionksi 12300
Fabrication Properties
Technique Suitability
Soldering Excellent
Brazing Excellent
Oxyacetylene Welding Fair
Gas Shielded Arc Welding Good
Coated Metal Arc Welding Fair
Spot Weld Good
Seam Weld Fair
Butt Weld Excellent
Capacity for Being Cold Worked Good
Machinability Rating 20
Common Fabrication Processes

No fabrication process properties for this alloy

Thermal Properties
Treatment Minimum* Maximum* Value*
* Temperature is measured in Fahrenheit.
Stress Relief 482
Annealing 842
Hot Working Temperature 1292 1742
Typical Uses

No information for this alloy

Applicable Specifications

No applicable specifications for this alloy

Corrosion Properties

No Corrosion Properties Available.