Find suppliers for this alloy
C46600
Elements | ||||||
---|---|---|---|---|---|---|
Cu | Pb | Sn | Zn | Fe | Sb | |
Min (%) | 59.0 | 0.50 | 0.02 | |||
Max (%) | 62.0 | 0.20 | 1.0 | Rem | 0.10 | 0.10 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Rockwell 30T scale | Shear Strength (ksi) |
Section Size (in) |
Cold Work (%) |
---|---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). | ||||||||||
Flat Products | 1/4 Hard | H01 |
70 Typ |
58 Typ |
17 Typ |
75 Typ |
68 Typ |
43 Typ |
0.04 | |
As Hot Rolled | M20 |
55 Typ |
25 Typ |
50 Typ |
55 Typ |
55 Typ |
40 Typ |
1 | ||
Light Anneal | O50 |
60 Typ |
28 Typ |
45 Typ |
58 Typ |
56 Typ |
41 Typ |
0.25 | ||
Light Anneal | O50 |
62 Typ |
30 Typ |
40 Typ |
60 Typ |
57 Typ |
41 Typ |
0.04 | ||
Soft Anneal | O60 |
58 Typ |
25 Typ |
49 Typ |
56 Typ |
55 Typ |
40 Typ |
0.25 | ||
Rod | 1/2 Hard | H02 |
80 Typ |
57 Typ |
20 Typ |
85 Typ |
45 Typ |
0.25 | 20 | |
1/2 Hard | H02 |
75 Typ |
53 Typ |
20 Typ |
82 Typ |
44 Typ |
1 | 20 | ||
1/4 Hard | H01 |
70 Typ |
48 Typ |
25 Typ |
80 Typ |
43 Typ |
0.25 | 10 | ||
1/4 Hard | H01 |
69 Typ |
46 Typ |
27 Typ |
78 Typ |
43 Typ |
1 | 8 | ||
1/4 Hard | H01 |
67 Typ |
40 Typ |
35 Typ |
75 Typ |
43 Typ |
2 | 8 | ||
Light Anneal | O50 |
62 Typ |
28 Typ |
43 Typ |
60 Typ |
42 Typ |
2 | |||
Light Anneal | O50 |
63 Typ |
30 Typ |
40 Typ |
60 Typ |
42 Typ |
0.25 | |||
Light Anneal | O50 |
63 Typ |
30 Typ |
40 Typ |
60 Typ |
42 Typ |
1 | |||
Soft Anneal | O60 |
58 Typ |
27 Typ |
45 Typ |
56 Typ |
40 Typ |
0.25 | |||
Soft Anneal | O60 |
56 Typ |
25 Typ |
47 Typ |
55 Typ |
40 Typ |
2 | |||
Soft Anneal | O60 |
57 Typ |
25 Typ |
47 Typ |
55 Typ |
40 Typ |
1 | |||
Tube | Hard | H04 |
88 Typ |
66 Typ |
18 Typ |
95 Typ |
35 |
Melting Point - Liquidus°F | 1650 |
---|---|
Melting Point - Solidus°F | 1630 |
Densitylb/cu in. at 68°F | 0.304 |
Specific Gravity | 8.41 |
Electrical Conductivity% IACS at 68°F | 26 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 67 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11.8 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 15000 |
Modulus of Rigidityksi | 5600 |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxyacetylene Welding | Good |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Good |
Seam Weld | Fair |
Butt Weld | Good |
Capacity for Being Cold Worked | Fair |
Capacity for Being Hot Formed | Excellent |
Forgeability Rating | 90 |
Machinability Rating | 30 |
Common Fabrication Processes
- Blanking
- Drawing
- Forming and Bending
- Heading and Upsetting
- Hot Forging and Pressing
- hot heading and upsetting
- Shearing
Treatment | Minimum* | Maximum* | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. | ||||
Annealing | 800 | 1100 | ||
Hot Working Temperature | 1200 | 1500 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Fasteners | Bolts | Appearance | Appearance |
Bolts | Corrosion Resistance | Corrosion Resistance | |
Bolts | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Bolts | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Bolts | Forming Characteristics | Formability | |
Bolts | Mechanical Properties | Moderate Strength | |
Nuts | Appearance | Appearance | |
Nuts | Corrosion Resistance | Corrosion Resistance | |
Nuts | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Nuts | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Nuts | Mechanical Properties | Moderate Strength | |
Rivets | Corrosion Resistance | Corrosion Resistance | |
Rivets | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Rivets | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Rivets | Corrosion Resistance | Dezincification Resistance | |
Rivets | Forming Characteristics | Formability | |
Rivets | Mechanical Properties | Moderate Strength | |
Industrial | Aircraft Turn buckle Barrels | Corrosion Resistance | Corrosion Resistance |
Aircraft Turn buckle Barrels | Corrosion Resistance | Dezincification Resistance | |
Aircraft Turn buckle Barrels | Forming Characteristics | Formability | |
Aircraft Turn buckle Barrels | Mechanical Properties | Moderate Strength | |
Balls | Corrosion Resistance | Corrosion Resistance | |
Balls | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Balls | Forming Characteristics | Formability | |
Balls | Mechanical Properties | Moderate Strength | |
Condenser Plates | Corrosion Resistance | Corrosion Resistance | |
Condenser Plates | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Condenser Plates | Corrosion Resistance | Dezincification Resistance | |
Condenser Plates | Forming Characteristics | Formability | |
Condenser Plates | Mechanical Properties | Moderate Strength | |
Structural Uses | Appearance | Appearance | |
Structural Uses | Corrosion Resistance | Corrosion Resistance | |
Structural Uses | Forming Characteristics | Formability | |
Structural Uses | Mechanical Properties | High Strength | |
Valve Stems | Corrosion Resistance | Corrosion Resistance | |
Valve Stems | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Valve Stems | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Valve Stems | Forming Characteristics | Formability | |
Valve Stems | Mechanical Properties | Moderate Strength | |
Welding Rod | Conductivity (Electrical) | Electrical Conductivity | |
Welding Rod | Conductivity (Thermal) | Thermal Conductivity | |
Welding Rod | Corrosion Resistance | Oxidation Resistance | |
Welding Rod | Softening Resistance | Resistance to Thermal Softening | |
Marine | Hardware | Appearance | Appearance |
Hardware | Corrosion Resistance | Corrosion Resistance | |
Hardware | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Hardware | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Hardware | Corrosion Resistance | Dezincification Resistance | |
Hardware | Forming Characteristics | Formability | |
Propeller Shafts | Corrosion Resistance | Corrosion Resistance | |
Propeller Shafts | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
Propeller Shafts | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Propeller Shafts | Forming Characteristics | Formability | |
Propeller Shafts | Friction & Wear Properties | Galling Resistance | |
Propeller Shafts | Friction & Wear Properties | Wear Resistance | |
Propeller Shafts | Mechanical Properties | Moderate Strength |
Applicable Specifications
Corrosion Properties