Find suppliers for this alloy C50590
Chemical Composition
Elements
Cu(1) Pb Sn Zn Fe P
(1) Cu + Sum of Named Elements 99.5% min.
Min (%) 97.0 0.50 0.05 0.02
Max (%) 0.02 1.5 0.50 0.40 0.15
Mechanical Properties *
Form Temper Temper Code Tensile Strength
(ksi)
YS-0.2% Offset
(ksi)
Elongation
(%)
Vickers Hardness, 500 gm Fatigue Strength**
(ksi)
Proportional Limit
(ksi)
Section Size
(in)
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Flat Products 1/2 Hard H02 58 Typ
53 Typ
18 Typ
130 Typ
49 Typ
Hard H04 74 Typ
67 Typ
11 Typ
156 Typ
28 Typ 61 Typ 0.009
Physical Properties
Melting Point - Liquidus°F 1969
Melting Point - Solidus°F 1904
Densitylb/cu in. at 68°F 0.321
Specific Gravity 8.9
Electrical Conductivity% IACS at 68°F 50
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F 116.2
Specific Heat CapacityBtu/ lb /°F at 68°F 0.09
Modulus of Elasticity in Tensionksi 12300
Modulus of Rigidityksi 4600
Fabrication Properties
Technique Suitability
Soldering Excellent
Brazing Good
Gas Shielded Arc Welding Good
Spot Weld Good
Capacity for Being Hot Formed Excellent
Forgeability Rating 0
Machinability Rating 20
Common Fabrication Processes

No fabrication process properties for this alloy

Thermal Properties
Treatment Minimum* Maximum* Time**
* Temperature is measured in Fahrenheit. ** Time is measured in minutes.
Annealing 842 1022 0.5
Hot Working Temperature 1472 1742
Stress Relief 437
Typical Uses

No information for this alloy

Applicable Specifications

No applicable specifications for this alloy

Corrosion Properties

No Corrosion Properties Available.