Find suppliers for this alloy C61400
Chemical Composition
Elements
Cu(1,2) Pb Zn Fe P Al Mn
(1) Cu value includes Ag.
(2) Cu + Sum of Named Elements 99.5% min.
Min (%) 1.5 6.0
Max (%) Rem 0.01 0.20 3.5 0.015 8.0 1.0
Mechanical Properties *
Form Temper Temper Code Tensile Strength
(ksi)
YS-0.5% Ext
(ksi)
Elongation
(%)
Rockwell B scale Shear Strength
(ksi)
Torsion Modulus
(ksi)
Izod
(ft-lbs)
Fatigue Strength**
(ksi)
Ultimate Tensile Strength in Shear
(ksi)
Section Size
(in)
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106.
Flat Products Hard H04 89 Typ
60 Typ
32 Typ
87 Typ
0.125
Hard H04 85 Typ
58 Typ
35 Typ
86 Typ
0.312
Hard H04 78 Typ
45 Typ
40 Typ
84 Typ
1
Hard H04 80 Typ
54 Typ
38 Typ
85 Typ
48 Typ
0.5
Soft Anneal O60 80 Typ
40 Typ
40 Typ
42 Typ
0.315
Soft Anneal O60 80 Typ
40 Typ
40 Typ
83 Typ
42 Typ
26 Typ 0.312
Soft Anneal O60 82 Typ
45 Typ
40 Typ
84 Typ
45 Typ
30 Typ 0.125
Soft Anneal O60 82 Typ
45 Typ
40 Typ
45 Typ
0.118
Soft Anneal O60 76 Typ
33 Typ
45 Typ
81 Typ
28 Typ 40 Typ
1
Soft Anneal O60 78 Typ
35 Typ
42 Typ
40 Typ
0.59
Soft Anneal O60 78 Typ
35 Typ
42 Typ
82 Typ
40 Typ
25 Typ 0.5
Rod Drawn and Stress Relieved HR50 75 Min for Standard
30 Min for Standard
1
Drawn and Stress Relieved HR50 80 Min for Standard
30 Min for Standard
0.5
Drawn and Stress Relieved HR50 70 Min for Standard
30 Min for Standard
2
Hard H04 85 Typ
45 Typ
35 Typ
91 Typ
48 Typ
0.5
Hard H04 82 Typ
40 Typ
35 Typ
90 Typ
45 Typ
1
Hard H04 80 Typ
35 Typ
35 Typ
88 Typ
40 Typ
6.1 Typ 26 Typ 2
Physical Properties
Melting Point - Liquidus°F 1915
Melting Point - Solidus°F 1905
Densitylb/cu in. at 68°F 0.285
Specific Gravity 7.89
Electrical Conductivity% IACS at 68°F 14
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F 39
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) 9
Specific Heat CapacityBtu/ lb /°F at 68°F 0.09
Modulus of Elasticity in Tensionksi 17000
Modulus of Rigidityksi 6400
Fabrication Properties
Technique Suitability
Soldering Not Recommended
Brazing Fair
Oxyacetylene Welding Not Recommended
Gas Shielded Arc Welding Good
Coated Metal Arc Welding Good
Spot Weld Good
Seam Weld Good
Butt Weld Good
Capacity for Being Cold Worked Good
Capacity for Being Hot Formed Good
Machinability Rating 20
Common Fabrication Processes
  • Blanking
  • Drawing
  • Forming and Bending
  • Heading and Roll Threading
Thermal Properties
Treatment Minimum* Maximum*
* Temperature is measured in Fahrenheit.
Annealing 1125 1650
Hot Working Temperature 1450 1700
Typical uses
Product Category Product Reason Category Reason
Fasteners Bolts Corrosion Resistance Corrosion Resistance
Bolts Corrosion Resistance Corrosion Resistance to Acids
Bolts Mechanical Properties High Strength
Nuts Corrosion Resistance Corrosion Resistance
Nuts Corrosion Resistance Corrosion Resistance in Numerous Environments
Nuts Corrosion Resistance Corrosion Resistance to Fresh Water
Nuts Corrosion Resistance Corrosion Resistance to Salt Water
Nuts Mechanical Properties High Strength
Stringers Corrosion Resistance Corrosion Resistance
Stringers Mechanical Properties High Strength
Threaded Members Corrosion Resistance Corrosion Resistance
Threaded Members Corrosion Resistance Corrosion Resistance to Acids
Threaded Members Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Threaded Members Corrosion Resistance Corrosion Resistance to Numerous Environments
Threaded Members Mechanical Properties High Strength
Industrial Chutes for Abrasive Grains Corrosion Resistance Corrosion Resistance
Chutes for Abrasive Grains Friction & Wear Properties Wear Resistance
Chutes for Abrasive Grains Mechanical Properties High Strength
Condenser Head Plates Corrosion Resistance Corrosion Resistance
Condenser Head Plates Corrosion Resistance Corrosion Resistance in Numerous Environments
Condenser Head Plates Corrosion Resistance Corrosion Resistance to Fresh Water
Condenser Head Plates Corrosion Resistance Corrosion Resistance to Salt Water
Condenser Head Plates Mechanical Properties High Strength
Condenser Tube and Piping Systems Corrosion Resistance Corrosion Resistance
Condenser Tube and Piping Systems Corrosion Resistance Corrosion Resistance to Fresh Water
Condenser Tube and Piping Systems Corrosion Resistance Corrosion Resistance to Salt Water
Condenser Tube and Piping Systems Mechanical Properties High Strength
Condenser Tube and Piping Systems Welding Characteristics Weldability
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance in Numerous Environments
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance to Acids
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance to Fresh Water
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance to Non-Oxidizing Mineral Acids
Corrosion Resistant Vessels Corrosion Resistance Corrosion Resistance to Salt Water
Corrosion Resistant Vessels Mechanical Properties High Strength
Heat Exchanger Tubes Corrosion Resistance Corrosion Resistance
Heat Exchanger Tubes Forming Characteristics Formability
Heat Exchanger Tubes Mechanical Properties High Strength
Heat Exchanger Tubes Welding Characteristics Weldability
Machine Parts Corrosion Resistance Corrosion Resistance
Machine Parts Corrosion Resistance Corrosion Resistance in Numerous Environments
Machine Parts Corrosion Resistance Corrosion Resistance to Fresh Water
Machine Parts Corrosion Resistance Corrosion Resistance to Salt Water
Machine Parts Mechanical Properties High Strength
Mining Shovels Corrosion Resistance Corrosion Resistance
Mining Shovels Friction & Wear Properties Wear Resistance
Mining Shovels Mechanical Properties High Strength
Mining Shovels Non-Sparking Non-Sparking
Piping Systems Corrosion Resistance Corrosion Resistance
Piping Systems Corrosion Resistance Corrosion Resistance in Numerous Environments
Piping Systems Corrosion Resistance Corrosion Resistance to Acids
Piping Systems Corrosion Resistance Corrosion Resistance to Fresh Water
Piping Systems Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Piping Systems Corrosion Resistance Corrosion Resistance to Non-Oxidizing Mineral Acids
Piping Systems Corrosion Resistance Corrosion Resistance to Salt Water
Piping Systems Mechanical Properties High Strength
Sea Water Piping Corrosion Resistance Corrosion Resistance
Sea Water Piping Corrosion Resistance Corrosion Resistance to Salt Water
Sea Water Piping Mechanical Properties High Strength
Sea Water Piping Welding Characteristics Weldability
Seamless Tubing and Pipe Corrosion Resistance Corrosion Resistance
Seamless Tubing and Pipe Corrosion Resistance Corrosion Resistance in Numerous Environments
Seamless Tubing and Pipe Corrosion Resistance Corrosion Resistance to Fresh Water
Seamless Tubing and Pipe Corrosion Resistance Corrosion Resistance to Salt Water
Seamless Tubing and Pipe Forming Characteristics Formability
Seamless Tubing and Pipe Mechanical Properties High Strength
Seamless Tubing and Pipe Welding Characteristics Weldability
Structural Components Corrosion Resistance Corrosion Resistance
Structural Components Corrosion Resistance Corrosion Resistance in Numerous Environments
Structural Components Mechanical Properties High Strength
Tanks Corrosion Resistance Corrosion Resistance
Tanks Corrosion Resistance Corrosion Resistance to Salt Water
Tanks Mechanical Properties High Strength
Tanks Welding Characteristics Weldability
Tube Sheets Corrosion Resistance Corrosion Resistance
Tube Sheets Corrosion Resistance Corrosion Resistance in Numerous Environments
Tube Sheets Mechanical Properties High Strength
Tube Sheets Welding Characteristics Weldability
Welded Pipe Corrosion Resistance Corrosion Resistance
Welded Pipe Mechanical Properties High Strength
Welded Pipe Welding Characteristics Weldability
Marine Fasteners Corrosion Resistance Corrosion Resistance
Fasteners Corrosion Resistance Corrosion Resistance to Acids
Fasteners Corrosion Resistance Corrosion Resistance to Numerous Environments
Fasteners Mechanical Properties High Strength
Marine Hardware Corrosion Resistance Corrosion Resistance
Marine Hardware Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Marine Hardware Corrosion Resistance Stress Corrosion Cracking Resistance
Marine Hardware Mechanical Properties Moderate to High Strength
Pressure Vessels Corrosion Resistance Corrosion Resistance
Pressure Vessels Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Pressure Vessels Corrosion Resistance Stress Corrosion Cracking Resistance
Pressure Vessels Mechanical Properties Moderate to High Strength
Protective Sheathing Corrosion Resistance Corrosion Resistance
Protective Sheathing Corrosion Resistance Corrosion Resistance in Numerous Environments
Protective Sheathing Corrosion Resistance Corrosion Resistance to Fresh Water
Protective Sheathing Corrosion Resistance Corrosion Resistance to Salt Water
Protective Sheathing Mechanical Properties High Strength
Welded Tanks Corrosion Resistance Corrosion Resistance
Welded Tanks Corrosion Resistance Corrosion Resistance to Non Oxidizing Acids
Welded Tanks Corrosion Resistance Stress Corrosion Cracking Resistance
Welded Tanks Mechanical Properties Moderate to High Strength
Ordnance Blending Chambers Corrosion Resistance Corrosion Resistance
Blending Chambers Mechanical Properties High Strength
Blending Chambers Non-Sparking Non-Sparking
Mixing Troughs Corrosion Resistance Corrosion Resistance
Mixing Troughs Mechanical Properties High Strength
Mixing Troughs Non-Sparking Non-Sparking
Applicable Specifications
Form Specific Sub-Form Application System Standard Description
Bar FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Bolts ASTM F468 NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
Nuts ASTM F467 NONFERROUS NUTS FOR GENERAL USE
Pipe ASTM B608 WELDED COPPER ALLOY PIPE
Plate ASTM B100 ROLLED COPPER ALLOY BEARING AND EXPANSION PLATES AND SHEETS FOR BRIDGE AND OTHER STRUCTURAL USES
ASTM B432 COPPER AND COPPER ALLOY CLAD STEEL PLATE
FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
Plate & Sheet for Pressure Vessels, Condensers & Heat Exchangers ASTM B171/B171M COPPER ALLOY CONDENSER TUBE PLATES
for Pressure Vessels, Condensers & Heat Exchangers ASME SB171 COPPER ALLOY CONDENSER TUBE PLATES
Rod SAE J461 WROUGHT AND CAST COPPER ALLOYS
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Rod, Bar & Shapes for Pressure Vessels, Condensers & Heat Exchangers ASTM B150/B150M ALUMINUM BRONZE ROD, BAR AND SHAPES
for Pressure Vessels, Condensers & Heat Exchangers ASME SB150 ALUMINUM BRONZE ROD, BAR, AND SHAPES
Screws ASTM F468 NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
Seamless Condenser Tube & Ferrule Stock ASME SB111 COPPER AND COPPER ALLOY SEAMLESS CONDENSER TUBES & FERRULE STOCK
ASTM B111/B111M COPPER AND COPPER ALLOY SEAMLESS CONDENSER TUBES AND FERRULE STOCK
Seamless Pipe and Tube ASTM B315 SEAMLESS COPPER ALLOY PIPE AND TUBE
ASME SB315 COPPER-SILICON ALLOY SEAMLESS PIPE AND TUBE
Shapes SAE J461 WROUGHT AND CAST COPPER ALLOYS
SAE J463 WROUGHT COPPER AND COPPER ALLOYS
Sheet SAE J463 WROUGHT COPPER AND COPPER ALLOYS
FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Sheet, Strip & Rolled Bar Aluminum Bronze ASME SB169 ALUMINUM BRONZE PLATE, SHEET, STRIP, AND ROLLED BAR
Aluminum Bronze ASTM B169/B169M ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND ROLLED BAR
Strip SAE J463 WROUGHT COPPER AND COPPER ALLOYS
FEDERAL QQ-C-450 COPPER-ALUMINUM ALLOY (ALUMINUM BRONZE, PLATE, SHEET, STRIP, AND BAR)
SAE J461 WROUGHT AND CAST COPPER ALLOYS
Studs ASTM F468 NONFERROUS BOLTS, HEX CAP SCREWS, AND STUDS FOR GENERAL USE
Corrosion Properties

No Corrosion Properties Available.