Find suppliers for this alloy
C61800
Elements | ||||||
---|---|---|---|---|---|---|
Cu(1,2) | Pb | Zn | Fe | Al | Si | |
(1) Cu + Sum of Named Elements 99.5% min. (2) Cu value includes Ag. |
||||||
Min (%) | 0.50 | 8.5 | ||||
Max (%) | Rem | 0.02 | 0.02 | 1.5 | 11.0 | 0.10 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Shear Strength (ksi) |
Fatigue Strength** (ksi) |
Section Size (in) |
Cold Work (%) |
---|---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | ||||||||||
Rod | 1/2 Hard | H02 |
83 Typ |
39 Typ |
25 Typ |
88 Typ |
45 Typ |
2 | 15 | |
1/2 Hard | H02 |
80 Typ |
39 Typ |
28 Typ |
88 Typ |
43 Typ |
3 | 15 | ||
1/2 Hard | H02 |
85 Typ |
43 Typ |
23 Typ |
89 Typ |
47 Typ |
26 Typ | 1 | 15 | |
Wire | 1/2 Hard | H02 |
140 Typ |
0.063 | ||||||
1/2 Hard | H02 |
125 Typ |
0.152 |
Melting Point - Liquidus°F | 1913 |
---|---|
Melting Point - Solidus°F | 1904 |
Densitylb/cu in. at 68°F | 0.272 |
Specific Gravity | 7.53 |
Electrical Conductivity% IACS at 68°F | 13 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 37 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 17000 |
Modulus of Rigidityksi | 6400 |
Technique | Suitability |
---|---|
Soldering | Fair |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Good |
Spot Weld | Good |
Seam Weld | Good |
Butt Weld | Good |
Capacity for Being Cold Worked | Fair |
Capacity for Being Hot Formed | Good |
Forgeability Rating | 50 |
Machinability Rating | 40 |
Common Fabrication Processes
- Drawing
- Hot forging
- Hot Pressing
Treatment | Minimum* | Maximum* | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. | ||||
Annealing | 1100 | 1200 | ||
Hot Working Temperature | 1400 | 1625 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Industrial | Bearing Liners | Corrosion Resistance | Corrosion Resistance |
Bearing Liners | Machining Characteristics | Average Speed | |
Bearing Liners | Mechanical Properties | Medium Load | |
Bearings | Corrosion Resistance | Corrosion Resistance | |
Bearings | Corrosion Resistance | Corrosion Resistance in Numerous Environments | |
Bearings | Corrosion Resistance | Corrosion Resistance to Chemicals | |
Bearings | Friction & Wear Properties | Wear Resistance | |
Bearings | Mechanical Properties | High Strength | |
Bearings | Softening Resistance | Resistance to Softening | |
Bushings | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Bushings | Machining Characteristics | Average Speed | |
Bushings | Mechanical Properties | Medium Load | |
Pickling Hooks | Corrosion Resistance | Corrosion Resistance | |
Pickling Hooks | Corrosion Resistance | Corrosion Resistance to Acids | |
Pickling Hooks | Machining Characteristics | Average Speed | |
Pickling Hooks | Mechanical Properties | Medium Load | |
Pump Impellers | Corrosion Resistance | Corrosion Resistance | |
Pump Impellers | Machining Characteristics | Average Speed | |
Pump Impellers | Mechanical Properties | Medium Load | |
Shafts | Corrosion Resistance | Corrosion Resistance | |
Shafts | Corrosion Resistance | Corrosion Resistance in Numerous Environments | |
Shafts | Mechanical Properties | High Strength | |
Shafts | Softening Resistance | Resistance to Softening | |
Tie Rods | Corrosion Resistance | Corrosion Resistance | |
Tie Rods | Corrosion Resistance | Corrosion Resistance in Numerous Environments | |
Tie Rods | Mechanical Properties | High Strength | |
Tie Rods | Softening Resistance | Resistance to Softening | |
Welding Rod | Conductivity (Electrical) | Electrical Conductivity | |
Welding Rod | Conductivity (Thermal) | Thermal Conductivity | |
Welding Rod | Welding Characteristics | Weld to other Cu Al alloys | |
Welding Wire | Welding Characteristics | Weld Alloy - c61300 | |
Marine | Marine Hardware | Corrosion Resistance | Corrosion Resistance |
Marine Hardware | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Marine Hardware | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Marine Hardware | Mechanical Properties | Moderate Strength |
Form | Specific Sub-Form | Application | System | Standard | Description |
---|---|---|---|---|---|
Electrode | Welding | AWS | A5.6 | COPPER AND COPPER ALLOY COVERED ELECTRODES | |
Rod | Welding | AWS | A5.13 | SURFACE WELDING RODS AND ELECTRODES | |
Welding | AWS | A5.7 | COPPER AND COPPER ALLOY BARS, WELDING RODS | ||
Welding | AWS | A5.15 | WELDING RODS FOR WELDING CAST IRON | ||
Wire | AWS | A5.7 | COPPER AND COPPER ALLOY BARS, WELDING RODS | ||
MILITARY | MIL-W-6712 | WIRE, METALLIZING |
Corrosion Properties