Find suppliers for this alloy
C62300
| Elements | |||||||
|---|---|---|---|---|---|---|---|
| Cu(1,2) | Sn | Fe | Ni(3) | Al | Mn | Si | |
|
(1) Cu value includes Ag. (2) Cu + Sum of Named Elements 99.5% min. (3) Ni value includes Co. |
|||||||
| Min (%) | 2.0 | 8.5 | |||||
| Max (%) | Rem | 0.6 | 4.0 | 1.0 | 10.0 | 0.50 | 0.25 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Shear Strength (ksi) |
Torsion Modulus (ksi) |
Izod (ft-lbs) |
Fatigue Strength** (ksi) |
Section Size (in) |
Cold Work (%) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | ||||||||||||
| Bar | 1/2 Hard | H02 |
90 Typ |
45 Typ |
30 Typ |
85 Typ |
1 | 15 | ||||
| 1/2 Hard | H02 |
85 Typ |
40 Typ |
30 Typ |
82 Typ |
2 | 15 | |||||
| As Hot Extruded | M30 |
75 Typ |
35 Typ |
35 Typ |
80 Typ |
3 | ||||||
| Rod | 1/2 Hard | H02 |
98 Typ |
52 Typ |
22 Typ |
89 Typ |
52 Typ |
31 Typ | 0.5 | 15 | ||
| 1/2 Hard | H02 |
95 Typ |
50 Typ |
25 Typ |
88 Typ |
50 Typ |
30 Typ | 1 | 15 | |||
| 1/2 Hard | H02 |
92 Typ |
48 Typ |
28 Typ |
87 Typ |
48 Typ |
30 Typ | 2 | 15 | |||
| 1/2 Hard | H02 |
87 Typ |
45 Typ |
35 Typ |
85 Typ |
46 Typ |
6.4 Typ | 29 Typ | 3 | 15 | ||
| As Hot Extruded | M30 |
75 Typ |
35 Typ |
35 Typ |
80 Typ |
35 Typ |
25 Typ | 4 | ||||
| Melting Point - Liquidus°F | 1915 |
|---|---|
| Melting Point - Solidus°F | 1905 |
| Densitylb/cu in. at 68°F | 0.277 |
| Specific Gravity | 7.67 |
| Electrical Conductivity% IACS at 68°F | 12 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 31 |
| Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
| Modulus of Elasticity in Tensionksi | 17000 |
| Modulus of Rigidityksi | 6400 |
| Technique | Suitability |
|---|---|
| Soldering | Not Recommended |
| Brazing | Fair |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Good |
| Coated Metal Arc Welding | Good |
| Spot Weld | Good |
| Seam Weld | Good |
| Butt Weld | Good |
| Capacity for Being Cold Worked | Good |
| Capacity for Being Hot Formed | Good |
| Forgeability Rating | 75 |
| Machinability Rating | 50 |
Common Fabrication Processes
- Bending
- Forging
- Hot forging
- Hot Pressing
- Welding
| Treatment | Minimum* | Maximum* | ||
|---|---|---|---|---|
| * Temperature is measured in Fahrenheit. | ||||
| Annealing | 1100 | 1200 | ||
| Hot Working Temperature | 1300 | 1600 | ||
| Product Category | Product | Reason Category | Reason |
|---|---|---|---|
| Fasteners | Bolts | Corrosion Resistance | Corrosion Resistance |
| Bolts | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Bolts | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Bolts | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Bolts | Mechanical Properties | High Strength | |
| Nuts | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Nuts | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Nuts | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Nuts | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Nuts | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Nuts | Mechanical Properties | High Strength | |
| Industrial | Bearing Races | Corrosion Resistance | Corrosion Resistance |
| Bearing Races | Friction & Wear Properties | Medium Wear Service | |
| Bearings | Corrosion Resistance | Corrosion Resistance | |
| Bearings | Friction & Wear Properties | Wear Resistance | |
| Bearings | Mechanical Properties | High Strength | |
| Bushings | Corrosion Resistance | Corrosion Resistance | |
| Bushings | Friction & Wear Properties | Medium Wear Service | |
| Bushings | Friction & Wear Properties | Wear Resistance | |
| Bushings | Mechanical Properties | High Strength | |
| Cams | Corrosion Resistance | Corrosion Resistance | |
| Cams | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Cams | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Cams | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Cams | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Cams | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Cams | Friction & Wear Properties | Wear Resistance | |
| Cams | Mechanical Properties | High Strength | |
| Gears | Corrosion Resistance | Corrosion Resistance | |
| Gears | Friction & Wear Properties | Medium Wear Service | |
| Gears | Friction & Wear Properties | Wear Resistance | |
| Gears | Mechanical Properties | High Strength | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Pump Rods | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Pump Rods | Friction & Wear Properties | Galling Resistance | |
| Pump Rods | Friction & Wear Properties | Wear Resistance | |
| Pump Rods | Mechanical Properties | High Strength | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Valve Guides | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Valve Guides | Friction & Wear Properties | Galling Resistance | |
| Valve Guides | Friction & Wear Properties | Wear Resistance | |
| Valve Guides | Mechanical Properties | High Strength | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Valve Seats | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Valve Seats | Friction & Wear Properties | Wear Resistance | |
| Valve Seats | Mechanical Properties | High Strength | |
| Valve Stems | Corrosion Resistance | Corrosion Resistance | |
| Valve Stems | Friction & Wear Properties | Medium Wear Service | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance to Chemicals | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance to Fresh Water | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance to Non Oxidizing Acids | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance to Numerous Environments | |
| Worm Gears | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Worm Gears | Friction & Wear Properties | Wear Resistance | |
| Worm Gears | Mechanical Properties | High Strength | |
| Marine | Marine Hardware | Corrosion Resistance | Corrosion Resistance not as good as C62200 |
| Marine Hardware | Friction & Wear Properties | Non-Galling when run against Stainless Steel | |
| Marine Hardware | Mechanical Properties | Higher Strength than C62200 |
| Form | Specific Sub-Form | Application | System | Standard | Description |
|---|---|---|---|---|---|
| Bar | SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | ||
| SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | |||
| AMS | 4635 | ALUMINUM BRONZE BARS, RODS, AND FORGINGS, STRESS RELIEVED | |||
| ASTM | B124/B124M | COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES | |||
| Die | Forgings | AMS | 4635 | ALUMINUM BRONZE BARS, RODS, AND FORGINGS, STRESS RELIEVED | |
| Forgings | SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | ||
| Forgings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
| Forgings | MILITARY | MIL-B-16166 | BRONZE, ALUMINUM, FORGINGS, HEAT TREATED | ||
| Forgings, Die (Hot Pressed) | ASME | SB283 | COPPER AND COPPER ALLOY DIE FORGINGS (HOT PRESSED) | ||
| ASTM | B283/B283M | COPPER AND COPPER ALLOY DIE FORGINGS (HOT PRESSED) | |||
| Rod | ASTM | B124/B124M | COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES | ||
| SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | |||
| AMS | 4635 | ALUMINUM BRONZE BARS, RODS, AND FORGINGS, STRESS RELIEVED | |||
| SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | |||
| Rod, Bar & Shapes | Aluminum Bronze | ASTM | B150/B150M | ALUMINUM BRONZE ROD, BAR AND SHAPES | |
| Aluminum Bronze | ASME | SB150 | ALUMINUM BRONZE ROD, BAR, AND SHAPES | ||
| Shapes | ASTM | B124/B124M | COPPER AND COPPER-ALLOY FORGING ROD, BAR AND SHAPES |
Corrosion Properties
No Corrosion Properties Available.