Find suppliers for this alloy
C66910
Elements | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Cu(1,2) | Pb | Sn | Zn | Fe | Ni | Al | Co | Mn | Ti | Zr | Nb | |
(1) Not including Ag. (2) Cu + Sum of Named Elements 99.5% min. |
||||||||||||
Min (%) | 6.0 | 0.01 | 0.01 | 12.0 | ||||||||
Max (%) | Rem | 0.05 | 0.05 | 8.0 | 1.5 | 3.5 | 0.25 | 0.01 | 15.0 | 0.15 | 0.15 | 0.05 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
---|---|---|---|
* Measured at room temperature, 68°F (20°C). | |||
Flat Products & Tubing | 1/2 Hard | H02 |
84 Typ |
1/4 Hard | H01 |
75 Typ |
|
Anneal | ANNEAL |
67 Typ |
|
Extra Hard | H06 |
108 Typ |
|
Hard | H04 |
92 Typ |
|
Spring | H08 |
118 Typ |
(1)As annealed | |
Densitylb/cu in. at 68°F | 0.298 |
---|---|
Specific Gravity | 8.25 |
Electrical Conductivity% IACS at 68°F | 3.5 (1) |
Modulus of Elasticity in Tensionksi | 15000 |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxyacetylene Welding | Good |
Gas Shielded Arc Welding | Excellent |
Coated Metal Arc Welding | Good |
Spot Weld | Excellent |
Seam Weld | Excellent |
Butt Weld | Excellent |
Capacity for Being Cold Worked | Good |
Capacity for Being Hot Formed | Good |
Machinability Rating | 60 |
Common Fabrication Processes
Thermal Properties
Typical Uses
Applicable Specifications
Corrosion Properties