Find suppliers for this alloy
C67400
Elements | |||||||||
---|---|---|---|---|---|---|---|---|---|
Cu(1,2) | Pb | Sn | Zn | Fe | Ni(3) | Al | Mn | Si | |
(1) Cu + Sum of Named Elements 99.5% min. (2) Cu value includes Ag. (3) Ni value includes Co. |
|||||||||
Min (%) | 57.0 | 0.50 | 2.0 | 0.50 | |||||
Max (%) | 60.0 | 0.50 | 0.30 | Rem | 0.35 | 0.25 | 2.0 | 3.5 | 1.5 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Shear Strength (ksi) |
Fatigue Strength** (ksi) |
Section Size (in) |
---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | |||||||||
Bar | 1/2 Hard and Stress Relieved | HR02 |
85 Typ |
45 Typ |
24 Typ |
83 Typ |
|||
As Hot Extruded | M30 |
78 Typ |
38 Typ |
26 Typ |
78 Typ |
||||
Rod | 1/2 Hard and Stress Relieved | HR02 |
92 Typ |
55 Typ |
20 Typ |
87 Typ |
48 Typ |
29 Typ | 0.75 |
Soft Anneal | O60 |
70 Typ |
34 Typ |
28 Typ |
78 Typ |
0.75 |
Melting Point - Liquidus°F | 1625 |
---|---|
Melting Point - Solidus°F | 1590 |
Densitylb/cu in. at 68°F | 0.292 |
Specific Gravity | 8.08 |
Electrical Conductivity% IACS at 68°F | 23 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 58 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 16000 |
Modulus of Rigidityksi | 6000 |
Technique | Suitability |
---|---|
Soldering | Fair |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Good |
Seam Weld | Good |
Butt Weld | Good |
Capacity for Being Cold Worked | Poor |
Capacity for Being Hot Formed | Excellent |
Forgeability Rating | 100 |
Machinability Rating | 30 |
Common Fabrication Processes
- Hot Forging and Pressing
- Machining
Treatment | Minimum* | Maximum* | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. | ||||
Annealing | 800 | 1100 | ||
Hot Working Temperature | 1100 | 1250 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Industrial | Bushings | Bearing Properties | Bearing Properties Against Hardened Steel |
Bushings | Corrosion Resistance | Corrosion Resistance | |
Bushings | Corrosion Resistance | Corrosion Resistance to Salt Water | |
Bushings | Friction & Wear Properties | Galling Resistance | |
Bushings | Friction & Wear Properties | Wear Resistance | |
Cams | Corrosion Resistance | Corrosion Resistance | |
Cams | Friction & Wear Properties | Galling Resistance | |
Cams | Friction & Wear Properties | Wear Resistance | |
Cams | Mechanical Properties | High Strength | |
Chain Guides | Corrosion Resistance | Corrosion Resistance | |
Chain Guides | Friction & Wear Properties | Wear Resistance | |
Chain Guides | Mechanical Properties | High Strength | |
Food Conveyor Chain | Corrosion Resistance | Corrosion Resistance | |
Food Conveyor Chain | Friction & Wear Properties | Wear Resistance | |
Food Conveyor Chain | Mechanical Properties | High Strength | |
Gears | Corrosion Resistance | Corrosion Resistance | |
Gears | Friction & Wear Properties | Galling Resistance | |
Gears | Friction & Wear Properties | Wear Resistance | |
Gears | Mechanical Properties | High Strength | |
Shafts | Corrosion Resistance | Corrosion Resistance | |
Shafts | Friction & Wear Properties | Wear Resistance | |
Shafts | Mechanical Properties | Fatigue Strength | |
Shafts | Mechanical Properties | High Strength | |
Wear Plates | Bearing Properties | Bearing Properties Against Hardened Steel | |
Wear Plates | Corrosion Resistance | Corrosion Resistance | |
Wear Plates | Friction & Wear Properties | Galling Resistance | |
Wear Plates | Friction & Wear Properties | Wear Resistance | |
Other | Connecting Rods | Corrosion Resistance | Corrosion Resistance |
Connecting Rods | Mechanical Properties | Fatigue Life | |
Connecting Rods | Mechanical Properties | High Strength |
Form | Specific Sub-Form | Application | System | Standard | Description |
---|---|---|---|---|---|
Bar | SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | ||
SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | |||
Forgings | Forgings | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | |
Forgings | SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | ||
Rod | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS | |||
Shapes | SAE | J461 | WROUGHT AND CAST COPPER ALLOYS | ||
SAE | J463 | WROUGHT COPPER AND COPPER ALLOYS |
Corrosion Properties