Find suppliers for this alloy
C70280
| Elements | ||||||||
|---|---|---|---|---|---|---|---|---|
| Cu(1,2) | Pb | Sn | Zn | Fe | P | Ni(3) | Si | |
|
(1) Cu value includes Ag. (2) Cu + Sum of Named Elements 99.5% min. (3) Ni value includes Co. |
||||||||
| Min (%) | 1.0 | 0.02 | 1.3 | 0.22 | ||||
| Max (%) | Rem | 0.02 | 1.5 | 0.30 | 0.015 | 0.04 | 1.7 | 0.30 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | |||||
| Flat Products | Mill-hardened Temper, TM - Hard | TM04 |
75 Typ |
65 Typ |
15 Min |
| Mill-hardened Temper, TM - XHMS Spring | TM08 |
95 Typ |
90 Typ |
7 Min |
|
| Mill-hardened Temper, TM -XHM - Extra Hard | TM06 |
85 Typ |
75 Typ |
10 Min |
|
| Melting Point - Liquidus°F | 1967 |
|---|---|
| Melting Point - Solidus°F | 1895 |
| Densitylb/cu in. at 68°F | 0.321 |
| Specific Gravity | 8.9 |
| Electrical Conductivity% IACS at 68°F | 40 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 104 |
| Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9.7 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
| Modulus of Elasticity in Tensionksi | 19000 |
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Excellent |
| Oxyacetylene Welding | Fair |
| Gas Shielded Arc Welding | Good |
| Coated Metal Arc Welding | Fair |
| Capacity for Being Cold Worked | Excellent |
Common Fabrication Processes
No fabrication process properties for this alloy
Thermal Properties
No thermal properties for this alloy
Typical Uses
No information for this alloy
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.