Find suppliers for this alloy
C79360
| Elements | |||||||
|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | Fe | Ni | Mn | |
|
(1) Cu + Sum of Named Elements 99.5% min. |
|||||||
| Min (%) | 55.0 | 24.0 | |||||
| Max (%) | 57.0 | 0.03 | 0.20 | Rem | 0.30 | 26.0 | 0.50 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | |||||
| Flat Products | Super Spring | H12 |
65.3 Min 79.8 Max |
58.0 Max | 5.0 Max |
| Ultra Spring | H13 |
74.5 Min 87.0 Max |
72.5 Max | 1.0 Max | |
| Super Spring | H14 |
84.1 Min |
79.8 Max | 1.0 Max | |
| Rod & Bar | Special Spring | H12 |
72.5 Min 79.8 Max |
2.0 Max | |
| Ultra Spring | H13 |
79.8 Min 87.0 Max |
1.0 Max | ||
| Super Spring | H14 |
79.8 Min 101.5 Max |
|||
| Wire | Super Spring | H12 |
94.3 Min 108.8 Max |
2.0 Max | |
| Ultra Spring | H13 |
101.5 Min 118.9 Max |
1.0 Max | ||
| Super Spring | H14 |
116.0 Min 118.0 Max |
|||
| Melting Point - Liquidus°F | 2102 |
|---|---|
| Densitylb/cu in. at 68°F | .318 |
| Specific Gravity | 8.8 |
| Electrical Conductivity% IACS at 68°F | 4.6 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 12.7 |
| Modulus of Elasticity in Tensionksi | 24000 |
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Excellent |
| Oxyacetylene Welding | Excellent |
| Gas Shielded Arc Welding | Excellent |
| Spot Weld | Excellent |
| Seam Weld | Excellent |
| Butt Weld | Excellent |
| Capacity for Being Cold Worked | Excellent |
| Capacity for Being Hot Formed | Excellent |
Common Fabrication Processes
No fabrication process properties for this alloy
Typical Uses
No information for this alloy
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.