Find suppliers for this alloy
C81540
| Elements | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Cu(1,2) | Pb | Sn | Zn | Fe | Ni(3) | Al | Cr | Si | |
|
(1) Cu + Sum of Named Elements 99.5% min. (2) Cu value includes Ag. (3) Ni value includes Co. |
|||||||||
| Min (%) | 95.1 | 2.0 | 0.10 | 0.40 | |||||
| Max (%) | 0.02 | 0.10 | 0.10 | 0.15 | 3.0 | 0.10 | 0.6 | 0.8 | |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Brinell Hardness, 3000 kg load | Charpy V-Notch Impact Strength (ft-lbs) |
|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | |||||||
| As Sand Cast | Precipitation Hardened | TF00 |
100 Typ |
75 Typ |
13 Typ |
210 Typ |
25 Typ |
| Melting Point - Liquidus°F | 2039 |
|---|---|
| Melting Point - Solidus°F | 2021 |
| Densitylb/cu in. at 68°F | 0.315 |
| Specific Gravity | 8.71 |
| Electrical Conductivity% IACS at 68°F | 48 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 125 |
| Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) | 9.7 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.1 |
| Modulus of Elasticity in Tensionksi | 16000 |
| Poisson's Ratio | 0.3 |
| Casting Attribute | Level |
|---|---|
| Casting Yield | Low |
| Drossing | High |
| Effect of Section Size | High |
| Fluidity | Medium |
| Gassing | Medium |
| Patternmakers Shrinkage inches per inch | 4/16 |
| Shrinkage in Solidification | Medium |
| Technique | Suitability |
|---|---|
| Soldering | Fair |
| Brazing | Not Recommended |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Good |
| Coated Metal Arc Welding | Not Recommended |
| Machinability Rating | 40 |
Common Fabrication Processes
No fabrication process properties for this alloy
Thermal Properties
No thermal properties for this alloy
| Product Category | Product | Reason Category | Reason |
|---|---|---|---|
| Industrial | Blow Mold Cavities | Conductivity (Thermal) | Thermal Conductivity |
| Blow Mold Cavities | Corrosion Resistance | Corrosion Resistance | |
| Blow Mold Cavities | Friction & Wear Properties | Wear Resistance | |
| Blow Mold Cavities | Mechanical Properties | High Strength | |
| Blow Mold Cavities | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Blow Pins for Blow Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Blow Pins for Blow Molds | Corrosion Resistance | Corrosion Resistance | |
| Blow Pins for Blow Molds | Friction & Wear Properties | Wear Resistance | |
| Blow Pins for Blow Molds | Mechanical Properties | High Strength | |
| Blow Pins for Blow Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Cavities for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Cavities for Injection Molds | Corrosion Resistance | Corrosion Resistance | |
| Cavities for Injection Molds | Friction & Wear Properties | Wear Resistance | |
| Cavities for Injection Molds | Mechanical Properties | High Strength | |
| Cavities for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Core Pins for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Core Pins for Injection Molds | Corrosion Resistance | Corrosion Resistance | |
| Core Pins for Injection Molds | Friction & Wear Properties | Wear Resistance | |
| Core Pins for Injection Molds | Mechanical Properties | High Strength | |
| Core Pins for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Cores for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Cores for Injection Molds | Corrosion Resistance | Corrosion Resistance | |
| Cores for Injection Molds | Friction & Wear Properties | Wear Resistance | |
| Cores for Injection Molds | Mechanical Properties | High Strength | |
| Cores for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Ejector Pins for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Ejector Pins for Injection Molds | Corrosion Resistance | Corrosion Resistance | |
| Ejector Pins for Injection Molds | Friction & Wear Properties | Wear Resistance | |
| Ejector Pins for Injection Molds | Mechanical Properties | High Strength | |
| Ejector Pins for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Flash Weld Dies | Conductivity (Thermal) | Thermal Conductivity | |
| Flash Weld Dies | Corrosion Resistance | Corrosion Resistance | |
| Flash Weld Dies | Friction & Wear Properties | Wear Resistance | |
| Flash Weld Dies | Mechanical Properties | High Strength | |
| Flash Weld Dies | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Hot Runner Systems for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Hot Runner Systems for Injection Molds | Friction & Wear Properties | Wear Resistance | |
| Hot Runner Systems for Injection Molds | Mechanical Properties | High Strength | |
| Hot Runner Systems for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Molds for Plastic Parts | Conductivity (Thermal) | Thermal Conductivity | |
| Molds for Plastic Parts | Corrosion Resistance | Corrosion Resistance | |
| Molds for Plastic Parts | Friction & Wear Properties | Wear Resistance | |
| Molds for Plastic Parts | Mechanical Properties | High Strength | |
| Molds for Plastic Parts | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Pinch Offs for Blow Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Pinch Offs for Blow Molds | Corrosion Resistance | Corrosion Resistance | |
| Pinch Offs for Blow Molds | Friction & Wear Properties | Wear Resistance | |
| Pinch Offs for Blow Molds | Mechanical Properties | High Strength | |
| Pinch Offs for Blow Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Resistance Welding Gun Arms | Conductivity (Thermal) | Thermal Conductivity | |
| Resistance Welding Gun Arms | Corrosion Resistance | Corrosion Resistance | |
| Resistance Welding Gun Arms | Corrosion Resistance | Oxidation Resistance | |
| Resistance Welding Gun Arms | Friction & Wear Properties | Wear Resistance | |
| Resistance Welding Tips | Conductivity (Thermal) | Thermal Conductivity | |
| Resistance Welding Tips | Corrosion Resistance | Corrosion Resistance | |
| Resistance Welding Tips | Friction & Wear Properties | Wear Resistance | |
| Resistance Welding Tips | Mechanical Properties | High Strength | |
| Resistance Welding Tips | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Resistance Welding Wheels | Conductivity (Thermal) | Thermal Conductivity | |
| Resistance Welding Wheels | Corrosion Resistance | Corrosion Resistance | |
| Resistance Welding Wheels | Corrosion Resistance | Oxidation Resistance | |
| Resistance Welding Wheels | Friction & Wear Properties | Wear Resistance | |
| Sprue Bushings for Injection Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Sprue Bushings for Injection Molds | Corrosion Resistance | Corrosion Resistance | |
| Sprue Bushings for Injection Molds | Mechanical Properties | High Strength | |
| Sprue Bushings for Injection Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Stud Welding Collets | Conductivity (Thermal) | Thermal Conductivity | |
| Stud Welding Collets | Corrosion Resistance | Corrosion Resistance | |
| Stud Welding Collets | Friction & Wear Properties | Wear Resistance | |
| Stud Welding Collets | Mechanical Properties | High Strength | |
| Stud Welding Collets | Mechanical Properties | Retains Strength at Elevated Temperatures | |
| Tip Welding Collets | Conductivity (Thermal) | Thermal Conductivity | |
| Tip Welding Collets | Corrosion Resistance | Corrosion Resistance | |
| Tip Welding Collets | Mechanical Properties | High Strength | |
| Tip Welding Collets | Mechanical Properties | Retains Strength at Elevated Temperatures |
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.