Find suppliers for this alloy
C82400
| Elements | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | Fe | Ni | Al | Be | Co | Cr | |
|
(1) Cu + Sum of Named Elements 99.5% min. |
||||||||||
| Min (%) | 1.60 | 0.20 | ||||||||
| Max (%) | Rem | 0.02 | 0.10 | 0.10 | 0.20 | 0.20 | 0.15 | 1.85 | 0.65 | 0.09 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
Rockwell B scale | Rockwell C scale | Torsion Modulus (ksi) |
Fatigue Strength** (ksi) |
|---|---|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | |||||||||
| As Sand Cast | As Sand Cast | M01 |
70 Min for Standard |
35 Min for Standard |
15 Min for Standard |
||||
| Precipitation Hardened | TF00 |
145 Min for Standard 155 Typ |
135 Min for Standard |
1 Min for Standard |
38 Typ |
7.3 Typ | 23 Typ | ||
| Solution Heat Treated | TB00 |
60 Typ |
20 Typ |
40 Typ |
59 Typ |
||||
| (1)TF00 Condition | |
| Melting Point - Liquidus°F | 1825 |
|---|---|
| Melting Point - Solidus°F | 1650 |
| Densitylb/cu in. at 68°F | 0.298 (1) |
| Specific Gravity | 8.26 |
| Electrical Conductivity% IACS at 68°F | 25 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 76.9 |
| Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) | 9.4 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.1 |
| Modulus of Elasticity in Tensionksi | 18500 |
| Change in Density During Aging% | 0.6 |
| Incipient Melting°F | 1585 |
| Magnetic Permeability | 1.001 |
| Poisson's Ratio | 0.3 |
| Casting Attribute | Level |
|---|---|
| Casting Yield | High |
| Drossing | Low |
| Effect of Section Size | Medium |
| Fluidity | High |
| Gassing | Medium |
| Patternmakers Shrinkage inches per inch | 3/16 |
| Shrinkage in Solidification | Medium |
| Shrinkage During Aging | 0.2 |
| Technique | Suitability |
|---|---|
| Soldering | Fair |
| Brazing | Fair |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Fair |
| Coated Metal Arc Welding | Fair |
| Machinability Rating | 30 |
Common Fabrication Processes
No fabrication process properties for this alloy
| Treatment | Minimum* | Maximum* | Value* | Time** | Medium |
|---|---|---|---|---|---|
| * Temperature is measured in Fahrenheit. ** Time is measured in minutes. | |||||
| Stress Relief | 500 | ||||
| Solution Treatment | 1400 | 1475 | 0.5 | Water | |
| Precipitation Treatment | 650 | 3 | Air | ||
| Product Category | Product | Reason Category | Reason |
|---|---|---|---|
| Architecture | Sculpture | Appearance | Appearance |
| Sculpture | Corrosion Resistance | Corrosion Resistance | |
| Sculpture | Mechanical Properties | High Strength | |
| Consumer | Golf Clubs | Corrosion Resistance | Corrosion Resistance |
| Golf Clubs | Mechanical Properties | High Modulus of Elasticity | |
| Golf Clubs | Mechanical Properties | Very High Strength | |
| Jewelry | Appearance | Appearance | |
| Jewelry | Corrosion Resistance | Corrosion Resistance | |
| Jewelry | Corrosion Resistance | Oxidation Resistance | |
| Jewelry | Mechanical Properties | Ductility | |
| Safety Tools | Corrosion Resistance | Corrosion Resistance | |
| Safety Tools | Mechanical Properties | Very High Strength | |
| Safety Tools | Non-Magnetic | Non-Magnetic | |
| Safety Tools | Non-Sparking | Non-Sparking | |
| Industrial | Aluminum Die Cast Plunger Tips | Conductivity (Thermal) | Thermal Conductivity |
| Aluminum Die Cast Plunger Tips | Corrosion Resistance | Corrosion Resistance | |
| Aluminum Die Cast Plunger Tips | Friction & Wear Properties | Excellent Wear Resistance | |
| Aluminum Die Cast Plunger Tips | Mechanical Properties | Very High Strength | |
| Bearings | Corrosion Resistance | Corrosion Resistance | |
| Bearings | Friction & Wear Properties | Excellent Wear Resistance | |
| Bearings | Mechanical Properties | Very High Strength | |
| Bushings | Corrosion Resistance | Corrosion Resistance | |
| Bushings | Friction & Wear Properties | Excellent Wear Resistance | |
| Bushings | Mechanical Properties | Very High Strength | |
| Cams | Corrosion Resistance | Corrosion Resistance | |
| Cams | Friction & Wear Properties | Excellent Wear Resistance | |
| Cams | Mechanical Properties | Very High Strength | |
| Corrosion Resistant Valves | Corrosion Resistance | Corrosion Resistance | |
| Corrosion Resistant Valves | Friction & Wear Properties | Wear Resistance | |
| Corrosion Resistant Valves | Mechanical Properties | Very High Strength | |
| Gears | Corrosion Resistance | Corrosion Resistance | |
| Gears | Friction & Wear Properties | Excellent Wear Resistance | |
| Gears | Mechanical Properties | Very High Strength | |
| Glass Molds | Conductivity (Thermal) | Thermal Conductivity | |
| Glass Molds | Corrosion Resistance | Corrosion Resistance | |
| Glass Molds | Friction & Wear Properties | Excellent Wear Resistance | |
| Glass Molds | Mechanical Properties | High Strength | |
| Molds for Plastic Parts | Conductivity (Thermal) | Thermal Conductivity | |
| Molds for Plastic Parts | Corrosion Resistance | Corrosion Resistance | |
| Molds for Plastic Parts | Friction & Wear Properties | Excellent Wear Resistance | |
| Molds for Plastic Parts | Mechanical Properties | High Strength | |
| Permanent Molds for Brass and Aluminum Castings | Conductivity (Thermal) | Thermal Conductivity | |
| Permanent Molds for Brass and Aluminum Castings | Corrosion Resistance | Corrosion Resistance | |
| Permanent Molds for Brass and Aluminum Castings | Friction & Wear Properties | Excellent Wear Resistance | |
| Permanent Molds for Brass and Aluminum Castings | Mechanical Properties | Very High Strength | |
| Pressure Housings in Salt Water Environments | Corrosion Resistance | Corrosion Resistance | |
| Pressure Housings in Salt Water Environments | Corrosion Resistance | Resists Stress Corrosion Cracking in Marine Environments | |
| Pressure Housings in Salt Water Environments | Mechanical Properties | High Strength | |
| Pump Components | Corrosion Resistance | Corrosion Resistance | |
| Pump Components | Corrosion Resistance | Resists Stress Corrosion Cracking in Marine Environments | |
| Pump Components | Corrosion Resistance | Resists Stress Corrosion Cracking in Most Chemical Environments | |
| Pump Components | Mechanical Properties | High Strength | |
| Valves | Corrosion Resistance | Corrosion Resistance | |
| Valves | Friction & Wear Properties | Excellent Wear Resistance | |
| Valves | Mechanical Properties | Very High Strength | |
| Marine | Submarine Telephone Cable Hydrophone | Conductivity (Electrical) | Electrical Conductivity |
| Submarine Telephone Cable Hydrophone | Corrosion Resistance | Corrosion Resistance | |
| Submarine Telephone Cable Hydrophone | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Submarine Telephone Cable Hydrophone | Mechanical Properties | Very High Strength | |
| Submarine Telephone Cable Repeater Systems | Conductivity (Electrical) | Electrical Conductivity | |
| Submarine Telephone Cable Repeater Systems | Corrosion Resistance | Corrosion Resistance | |
| Submarine Telephone Cable Repeater Systems | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Submarine Telephone Cable Repeater Systems | Corrosion Resistance | Resists Stress Corrosion Cracking in Marine Environments | |
| Submarine Telephone Cable Repeater Systems | Mechanical Properties | Very High Strength | |
| Undersea Cable Housings | Conductivity (Electrical) | Electrical Conductivity | |
| Undersea Cable Housings | Corrosion Resistance | Corrosion Resistance | |
| Undersea Cable Housings | Corrosion Resistance | Corrosion Resistance to Salt Water | |
| Undersea Cable Housings | Mechanical Properties | Very High Strength |
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.