Find suppliers for this alloy
C85560
Elements | ||||||||
---|---|---|---|---|---|---|---|---|
Cu(1,2) | Pb | Sn | Zn(3) | Fe | Ni | As(4) | Bi | |
(1) Cu value includes Ag. (2) Cu + Sum of Named Elements 99.5% min. (3) For optimum DZR properties , Zn should not exceed 38%. (4) P may be substituted for As. |
||||||||
Min (%) | 60.0 | .10 | .20 | .05 | .60 | |||
Max (%) | 64.0 | .25 | .50 | Rem | .15 | .20 | .20 | .90 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Vickers Hardness, 500 gm |
---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). | |||||||
Bar | Cast and Annealed (homogenized) | O10 |
50 Typ |
24 Typ |
20 Typ |
53 Typ |
102 Typ |
Melting Point - Liquidus°F | 1688 |
---|---|
Melting Point - Solidus°F | 166 |
Densitylb/cu in. at 68°F | 0.305 |
Electrical Conductivity% IACS at 68°F | 28 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11.4 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.9 |
Modulus of Elasticity in Tensionksi | 14504 |
Casting Characteristics
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxyacetylene Welding | Excellent |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Good |
Seam Weld | Poor |
Capacity for Being Cold Worked | Good |
Capacity for Being Hot Formed | Good |
Forgeability Rating | 85 |
Machinability Rating | 85 |
Common Fabrication Processes
Thermal Properties
Typical Uses
Applicable Specifications
Corrosion Properties