Find suppliers for this alloy
C85690
| Elements | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | P | Al | B | Cr | Mn | Se | |
|
(1) Cu + Sum of Named Elements 99.8% min. |
||||||||||
| Min (%) | 62.5 | 0.30 | 0.03 | 0.02 | 0.001 | 0.03 | 0.03 | 0.05 | ||
| Max (%) | 65.0 | 0.10 | 0.9 | Rem | 0.09 | 0.06 | 0.003 | 0.09 | 0.09 | 0.15 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
Shear Strength (ksi) |
Compressive Yield Strength (ksi) |
|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | |||||||
| Rod | As Permanent Mold Cast | M05 |
53.5 Typ |
20.3 Typ |
50 Typ |
39.9 Typ |
166.4 Typ |
| Melting Point - Liquidus°F | 1702 |
|---|---|
| Melting Point - Solidus°F | 1636 |
| Densitylb/cu in. at 68°F | 0.304 |
| Specific Gravity | 8.43 |
| Electrical Conductivity% IACS at 68°F | 24.3 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 49.8 |
| Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 11.5 |
| Modulus of Elasticity in Tensionksi | 10430 |
| Poisson's Ratio | 0.409 |
Casting Characteristics
No casting characteristics for this alloy
| Technique | Suitability |
|---|---|
| Soldering | Good |
| Brazing | Good |
| Forgeability Rating | 95 |
| Machinability Rating | 85 |
Common Fabrication Processes
No fabrication process properties for this alloy
Thermal Properties
No thermal properties for this alloy
Typical Uses
No information for this alloy
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.