Find suppliers for this alloy
C87600
| Elements | ||||||
|---|---|---|---|---|---|---|
| Cu(1) | Pb | Zn | Fe | Mn | Si | |
|
(1) Cu + Sum of Named Elements 99.5% min. |
||||||
| Min (%) | 88.0 | 4.0 | 3.5 | |||
| Max (%) | 0.09 | 7.0 | 0.20 | 0.25 | 5.5 | |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Brinell Hardness, 500 kg load | Brinell Hardness, 3000 kg load | Compressive Strength .1 in. set/in. (ksi) |
|---|---|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | |||||||||
| As Centrifugal Cast | As Centrifugal Cast | M02 |
60 Min for Standard |
30 Min for Standard |
16 Min for Standard |
||||
| As Sand Cast | As Sand Cast | M01 |
60 Min for Standard 66 Typ |
30 Min for Standard 32 Typ |
16 Min for Standard 20 Typ |
76 Typ |
110 Typ |
135 Typ |
60 Typ |
| Melting Point - Liquidus°F | 1780 |
|---|---|
| Melting Point - Solidus°F | 1580 |
| Densitylb/cu in. at 68°F | 0.3 |
| Specific Gravity | 8.3 |
| Electrical Conductivity% IACS at 68°F | 6 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 16.4 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
| Modulus of Elasticity in Tensionksi | 17000 |
| Casting Attribute | Level |
|---|---|
| Casting Yield | Medium |
| Drossing | Low |
| Effect of Section Size | Medium |
| Fluidity | High |
| Gassing | High |
| Patternmakers Shrinkage inches per inch | 3/16 |
| Shrinkage in Solidification | Medium |
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Excellent |
| Oxyacetylene Welding | Fair |
| Gas Shielded Arc Welding | Excellent |
| Coated Metal Arc Welding | Good |
| Spot Weld | Good |
| Seam Weld | Good |
| Butt Weld | Good |
| Machinability Rating | 40 |
Common Fabrication Processes
No fabrication process properties for this alloy
| Treatment | Value* | Time** | ||
|---|---|---|---|---|
| * Temperature is measured in Fahrenheit. ** Time is measured in minutes. | ||||
| Stress Relief | 500 | |||
| Solution Treatment | 0 | |||
| Product Category | Product | Reason Category | Reason |
|---|---|---|---|
| Architecture | Artistry Components | Appearance | Appearance |
| Artistry Components | Casting Characteristics | Castability | |
| Artistry Components | Corrosion Resistance | Corrosion Resistance | |
| Artistry Components | Mechanical Properties | High Strength | |
| Electrical | Electrical Components | Casting Characteristics | Castability |
| Electrical Components | Conductivity (Electrical) | Electrical Conductivity | |
| Electrical Components | Conductivity (Thermal) | Thermal Conductivity | |
| Electrical Components | Corrosion Resistance | Corrosion Resistance | |
| Electrical Components | Mechanical Properties | High Strength | |
| Industrial | Bearings | Casting Characteristics | Castability |
| Bearings | Corrosion Resistance | Corrosion Resistance | |
| Bearings | Mechanical Properties | High Strength | |
| Engineering Applications | Casting Characteristics | Castability | |
| Engineering Applications | Corrosion Resistance | Corrosion Resistance | |
| Engineering Applications | Mechanical Properties | High Strength | |
| Valve Bodies | Casting Characteristics | Castability | |
| Valve Bodies | Corrosion Resistance | Corrosion Resistance | |
| Valve Bodies | Mechanical Properties | High Strength | |
| Valve Stems | Corrosion Resistance | Corrosion Resistance | |
| Valve Stems | Mechanical Properties | Ductility | |
| Valve Stems | Mechanical Properties | High Strength |
| Form | Specific Sub-Form | Application | System | Standard | Description |
|---|---|---|---|---|---|
| As Centrifugal Cast | ASTM | B271/B271M | COPPER BASE ALLOY CENTRIFUGAL CASTINGS | ||
| As Sand Cast | Castings | ASTM | B584 | COPPER ALLOY SAND CASTINGS FOR GENERAL APPLICATIONS | |
| Castings | ASTM | B763/B763M | COPPER ALLOY SAND CASTINGS FOR VALVE APPLICATIONS | ||
| Ingot | ASTM | B30 | COPPER BASE ALLOYS IN INGOT FORM | ||
Corrosion Properties
No Corrosion Properties Available.