Find suppliers for this alloy
C89845
| Elements | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | Fe | P | Ni(2) | Al | Bi | Sb | Si | |
|
(1) Cu + Sum of Named Elements 99.5% min. (2) Ni value includes Co. |
|||||||||||
| Min (%) | 82.5 | 3.0 | 6.0 | 1.5 | 1.0 | ||||||
| Max (%) | 87.5 | 0.09 | 5.0 | 9.0 | 0.30 | 0.05 | 2.5 | 0.01 | 2.0 | 0.25 | 0.01 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
Rockwell B scale | Shear Strength (ksi) |
Fatigue Strength** (ksi) |
|---|---|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | ||||||||
| Rod & Bar | As Sand Cast | M01 |
28 Min 32 Typ 38 Max |
15 Min 16 Typ 18 Max |
15 Typ |
67 Typ |
64` Typ |
14 Typ |
| Melting Point - Liquidus°F | 1888 |
|---|---|
| Melting Point - Solidus°F | 1467 |
| Densitylb/cu in. at 68°F | 0.318 |
| Specific Gravity | 8.79 |
| Electrical Conductivity% IACS at 68°F | 14.6 |
| Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 36.2 |
| Coefficient of Thermal Expansion 68-21210 to -6 power per °F (68 – 212°F) | 9.7 |
| Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) | 9.8 |
| Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 10 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.089 |
| Modulus of Elasticity in Tensionksi | 15700 |
| Modulus of Rigidityksi | 5600 |
| Magnetic Permeability | 0.999 |
| Poisson's Ratio | 0.35 |
| Casting Attribute | Level |
|---|---|
| Casting Yield | High |
| Drossing | Medium |
| Effect of Section Size | High |
| Fluidity | Medium |
| Gassing | Medium |
| Patternmakers Shrinkage inches per inch | 3/16 |
| Shrinkage in Solidification | Medium |
| Technique | Suitability |
|---|---|
| Soldering | Excellent |
| Brazing | Excellent |
| Oxyacetylene Welding | Not Recommended |
| Gas Shielded Arc Welding | Not Recommended |
| Coated Metal Arc Welding | Not Recommended |
| Spot Weld | Not Recommended |
| Seam Weld | Not Recommended |
| Butt Weld | Not Recommended |
| Machinability Rating | 76 |
Common Fabrication Processes
No fabrication process properties for this alloy
Thermal Properties
No thermal properties for this alloy
Typical Uses
No information for this alloy
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.