Find suppliers for this alloy
C90280
Elements | ||||||
---|---|---|---|---|---|---|
Cu(1) | Pb | Sn | Fe | P | S | |
(1) Cu + Sum of Named Elements 99.5% min. |
||||||
Min (%) | 87.0 | 9.0 | .30 | .30 | ||
Max (%) | 90.0 | .09 | 11.0 | .6 | .05 | .6 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
Elongation (%) |
---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). | |||||
As Die Cast | As Pressure Die Cast | M04 |
315 Typ |
187 Typ |
19.3 Typ |
As Sand Cast | As Sand Cast | M01 |
315 Typ |
187 Typ |
19.3 Typ |
Melting Point - Liquidus°F | 1016 |
---|---|
Melting Point - Solidus°F | 835 |
Densitylb/cu in. at 68°F | 8.81 |
Electrical Conductivity% IACS at 68°F | 0.016 |
Coefficient of Thermal Expansion 68-21210 to -6 power per °F (68 – 212°F) | 18.3 |
Coefficient of Thermal Expansion 68-39210 to -6 power per °F (68 – 392°F) | 18.4 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 18.4 |
Casting Characteristics
Technique | Suitability |
---|---|
Soldering | Good |
Brazing | Good |
Oxyacetylene Welding | Good |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Not Recommended |
Spot Weld | Good |
Seam Weld | Not Recommended |
Butt Weld | Not Recommended |
Capacity for Being Cold Worked | Not Recommended |
Capacity for Being Hot Formed | Not Recommended |
Machinability Rating | 70 |
Common Fabrication Processes
Thermal Properties
Typical Uses
Applicable Specifications
Corrosion Properties