Find suppliers for this alloy
C96600
Elements | |||||||
---|---|---|---|---|---|---|---|
Cu(1) | Pb | Fe | Ni(2) | Be | Mn | Si | |
(1) Cu + Sum of Named Elements 99.5% min. (2) Ni value includes Co. |
|||||||
Min (%) | 0.8 | 29.0 | 0.40 | ||||
Max (%) | Rem | 0.01 | 1.1 | 33.0 | 0.7 | 1.0 | 0.15 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.2% Offset (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Rockwell B scale | Rockwell C scale | Charpy V-Notch Impact Strength (ft-lbs) |
Fatigue Strength** (ksi) |
---|---|---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). ** Fatigue Strength: 100 x 106 cycles, unless indicated as [N] x 106. | ||||||||||
As Sand Cast | Precipitation Hardened | TF00 |
120 Typ |
75 Typ |
12 Typ |
24 Typ |
41 Typ |
23 Typ | ||
Solution Heat Treated | TB00 |
75 Typ |
38 Typ |
12 Typ |
74 Typ |
Melting Point - Liquidus°F | 2160 |
---|---|
Melting Point - Solidus°F | 2010 |
Densitylb/cu in. at 68°F | 0.318 |
Specific Gravity | 8.8 |
Electrical Conductivity% IACS at 68°F | 4 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 17.4 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.09 |
Modulus of Elasticity in Tensionksi | 22000 |
Poisson's Ratio | 0.33 |
Casting Attribute | Level |
---|---|
Casting Yield | High |
Drossing | High |
Effect of Section Size | Low |
Fluidity | High |
Gassing | High |
Patternmakers Shrinkage inches per inch | 7/32 |
Shrinkage in Solidification | High |
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxyacetylene Welding | Good |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Fair |
Machinability Rating | 20 |
Common Fabrication Processes
Treatment | Minimum* | Maximum* | Value* | Time** | Medium |
---|---|---|---|---|---|
* Temperature is measured in Fahrenheit. ** Time is measured in minutes. | |||||
Stress Relief | 500 | ||||
Solution Treatment | 1800 | 1850 | 1 | Water | |
Precipitation Treatment | 950 | 3 | Air |
Typical Uses
Applicable Specifications
Corrosion Properties