Find suppliers for this alloy C96800
C96800 Cast COPPER NICKELS Copper-Nickel-Iron Alloys (Copper-Nickels) true true https://api.copper.org/alloys.xhtml/C96800
Chemical Composition
Elements
Cu(1,2) Pb Sn Zn Fe Ni(3) Mg Mn Si Nb
(1) The following additional maximum impurity limits shall apply: 0.10% Al, 0.001% B, 0.001% Bi, 0.005% P, 0.0025% S, 0.02% Sb, 0.01%Ti.
(2) Cu + Sum of Named Elements 99.5% min.
(3) Ni value includes Co.
Min (%) 7.5 9.5 0.005 0.05 0.10
Max (%) Rem 0.005 8.5 1.0 0.50 10.5 0.15 0.30 0.05 0.30
Mechanical Properties *
Form Temper Temper Code Tensile Strength
(ksi)		 Elongation
(%)
* Measured at room temperature, 68°F (20°C).
As Sand Cast As Sand Cast M01 125 Min for Standard
 3 Min for Standard
Spinodal Hardened-Low Strength (ATLS) TX00 135 Min for Standard
Physical Properties

No physical properties for this alloy

Casting Characteristics

No casting characteristics for this alloy

Fabrication Properties

No fabrication properties for this alloy

Common Fabrication Processes

No fabrication process properties for this alloy

Thermal Properties
Treatment Minimum* Value* Time** Medium
* Temperature is measured in Fahrenheit. ** Time is measured in minutes.
Solution Treatment 1500 2 Water
Precipitation Treatment 660 5
Typical Uses

No information for this alloy

Applicable Specifications
Form Specific Sub-Form Application System Standard Description
As Sand Cast Castings ASTM B584 COPPER ALLOY SAND CASTINGS FOR GENERAL APPLICATIONS
Ingot ASTM B30 COPPER BASE ALLOYS IN INGOT FORM
Corrosion Properties

No Corrosion Properties Available.