Find suppliers for this alloy
C99300
Elements | ||||||||
---|---|---|---|---|---|---|---|---|
Cu(1) | Pb | Sn | Fe | Ni | Al | Co | Si | |
(1) Cu + Sum of Named Elements 99.7% min. |
||||||||
Min (%) | 0.40 | 13.5 | 10.7 | 1.0 | ||||
Max (%) | Rem | 0.02 | 0.05 | 1.0 | 16.5 | 11.5 | 2.0 | 0.02 |
Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Brinell Hardness, 3000 kg load | Charpy V-Notch Impact Strength (ft-lbs) |
Proportional Limit (ksi) |
---|---|---|---|---|---|---|---|---|
* Measured at room temperature, 68°F (20°C). | ||||||||
As Sand Cast | As Sand Cast | M01 |
95 Typ |
55 Typ |
2 Typ |
200 Typ |
4 Typ |
28 Typ |
Melting Point - Liquidus°F | 1970 |
---|---|
Melting Point - Solidus°F | 1955 |
Densitylb/cu in. at 68°F | 0.275 |
Specific Gravity | 7.61 |
Electrical Conductivity% IACS at 68°F | 9 |
Thermal ConductivityBtu/ sq ft/ ft hr/ °F at 68°F | 25 |
Coefficient of Thermal Expansion 68-57210 to -6 power per °F (68 – 572°F) | 9.2 |
Specific Heat CapacityBtu/ lb /°F at 68°F | 0.1 |
Modulus of Elasticity in Tensionksi | 18000 |
Casting Attribute | Level |
---|---|
Casting Yield | Low |
Drossing | High |
Effect of Section Size | Low |
Fluidity | Medium |
Gassing | Medium |
Patternmakers Shrinkage inches per inch | 3/16 |
Shrinkage in Solidification | High |
Technique | Suitability |
---|---|
Soldering | Not Recommended |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Good |
Machinability Rating | 20 |
Common Fabrication Processes
Treatment | Value* | Time** | ||
---|---|---|---|---|
* Temperature is measured in Fahrenheit. ** Time is measured in minutes. | ||||
Stress Relief | 950 | |||
Solution Treatment | 0 |
Product Category | Product | Reason Category | Reason |
---|---|---|---|
Industrial | Corrosion and Scaling Resistant Parts | Appearance | Pleasing White Color |
Corrosion and Scaling Resistant Parts | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Corrosion and Scaling Resistant Parts | Corrosion Resistance | Oxidation Resistance | |
Corrosion and Scaling Resistant Parts | Mechanical Properties | Moderate Strength | |
Corrosion and Scaling Resistant Parts | Mechanical Properties | Retains Strength at Elevated Temperatures | |
Glass Making Molds | Conductivity (Thermal) | Thermal Conductivity | |
Glass Making Molds | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Glass Making Molds | Mechanical Properties | Moderate Strength | |
Glass Making Molds | Mechanical Properties | Retains Strength at Elevated Temperatures | |
Parts Requiring High Thermal Conductivity | Conductivity (Thermal) | Thermal Conductivity | |
Parts Requiring High Thermal Conductivity | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Parts Requiring High Thermal Conductivity | Corrosion Resistance | Oxidation Resistance | |
Parts Requiring High Thermal Conductivity | Mechanical Properties | Moderate Strength | |
Parts Requiring High Thermal Conductivity | Mechanical Properties | Retains Strength at Elevated Temperatures | |
Rolls for Making Plate Glass | Conductivity (Thermal) | Thermal Conductivity | |
Rolls for Making Plate Glass | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Rolls for Making Plate Glass | Mechanical Properties | Moderate Strength | |
Rolls for Making Plate Glass | Mechanical Properties | Retains Strength at Elevated Temperatures | |
Marine | Marine Hardware | Appearance | Appearance |
Marine Hardware | Corrosion Resistance | Corrosion Resistance (Excellent) | |
Marine Hardware | Mechanical Properties | Moderate Strength |
Applicable Specifications
Corrosion Properties