Find suppliers for this alloy
C99760
| Elements | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cu(1) | Pb | Sn | Zn | Fe | P | Ni(2) | Al | C | Mn | S | Sb | Si | |
|
(1) Cu + Sum of Named Elements 99.3% min. (2) Ni value includes Co. |
|||||||||||||
| Min (%) | 61.0 | 0.20 | 8.0 | 8.0 | 10.0 | 0.10 | |||||||
| Max (%) | 67.0 | 0.09 | 1.0 | 14.0 | 0.6 | 0.05 | 12.0 | 0.6 | 0.10 | 16.0 | 0.25 | 1.0 | 0.05 |
| Form | Temper | Temper Code | Tensile Strength (ksi) |
YS-0.5% Ext (ksi) |
Elongation (%) |
Brinell Hardness, 500 kg load |
|---|---|---|---|---|---|---|
| * Measured at room temperature, 68°F (20°C). | ||||||
| As Permanent Mold Cast | As Permanent Mold Cast | M05 |
39.6 Min 44.5 Typ |
24.9 Min 26.1 Typ |
9 Min 13 Typ |
82 Typ |
| As Sand Cast | As Sand Cast | M01 |
40.6 Min 44.9 Typ |
18.8 Min 21.7 Typ |
23 Min 35 Typ |
71 Typ |
| Melting Point - Liquidus°F | 1868 |
|---|---|
| Melting Point - Solidus°F | 1647 |
| Densitylb/cu in. at 68°F | 0.298 |
| Specific Gravity | 8.26 |
| Specific Heat CapacityBtu/ lb /°F at 68°F | 0.0934 |
| Modulus of Elasticity in Tensionksi | 15500 |
| Magnetic Permeability | 1 |
| Casting Attribute | Level |
|---|---|
| Casting Yield | High |
| Drossing | Medium |
| Effect of Section Size | High |
| Fluidity | Medium |
| Gassing | Medium |
| Patternmakers Shrinkage inches per inch | 3/16 |
| Shrinkage in Solidification | Medium |
Fabrication Properties
No fabrication properties for this alloy
Common Fabrication Processes
No fabrication process properties for this alloy
Thermal Properties
No thermal properties for this alloy
Typical Uses
No information for this alloy
Applicable Specifications
No applicable specifications for this alloy
Corrosion Properties
No Corrosion Properties Available.